Sounder Beacon Legacy Series
S-A491 Intelligent Sounder Strobe is a kind of audible and visual alarm device installed in field, which can be initiated by fire alarm control panel in fire control center or by manual call point installed in field. Having been initiated, it will generate strong audible and visual alarm signal to warn people in field.
Both shallow base with 25.5mm high and deep base with 40mm high are available, deep base is used if there is no special statement in this manual.
|Operating Voltage||Loop: 24V
|Wiring||Four-wire, connecting with polarity-insensitive loop. Polarity-insensitive two-wire for connecting power.|
|Tone I||Sound Level: 75dB~85dB (at 3m ahead horizontally (A weighted)
Flashing Frequency: 0.7 × (1±20%)Hz
Sound Pattern: 2.8KHz (430ms on /1200ms off)
|Tone II||Sound Level: 85dB~115dB (at 3m ahead horizontally (A weighted))
Flashing Frequency: 1.4×(1±20%)Hz
Sound Pattern: 2.8KHz (430ms on /340ms off)
|Programming Mode||Electronically addressed|
|Programming Range||Occupying 1 or 2 (when device type is 121) address within 1～242.|
|Ingress Protection Rating||IP33|
|Relative Humidity||≤95%, non condensing|
|Material and Color of Enclosure||ABS, red (PANTONE 1795C)|
|Mounting Hole Spacing||55mm～80mm|
|Weight||About 355g (deep base)
About 327g (shallow base)
- Providing two tones.
- Using several high red LEDs as light source.
- Initiated by shorting external terminals; not affected by loop power cut.
- Signal loop and power loop are polarity-insensitive, which is convenient for wiring and features power-off checking.
- Standard: EN 54-3.
Do you want to contact with us?
If you want to contact with us? please fill free an message by contact page.
Request a free consultation
8 years Experiences in my business service
Send us an email and we will get in tuch shortly or phone between 9.00am to 6.00pm Saturday to Thursday .