About Exort
Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium
About Us
Fire, Gas and Extinguishant System
DESCRIPTION
Certified by LPCB to meet fire test Standards – BS EN 50200:2006 + Annex E 30 minutes, BS EN 50200 PH30, PH60 & PH120 & BS 6387 CWZ. It is also fully approved to the Low Smoke & Zero Halogen requirements detailed by BS 5839-:2013 & BS7629-1:2008.
Shield ‘Premium’ Cable retains continuity for 30 minutes under fire conditions at 830°C, this demanding fire cable test includes a final 15 minutes under fire & water spray conditions while a mechanical shock is applied every 5 minutes throughout the full 30 minute test.
For more information, please download the catalogue.
SPECIFICATION
PCB approved to | Fire Resistance Standard | BS EN 50200:2006 +Annex E 30 mins |
---|---|---|
Fire Resistance Standard | BS EN 50200:2006 PH120 | |
Fire Resistance Standard | BS 6387:1994 Clause 11 CWZ | |
Halogen Emission Standard | BS EN 50267-2-1:1999 | |
Halogen Emission Standard | BS EN 61034-2:2005 | |
Also for use with | Emergency Lighting | BS 5266-1:2005 |
Voice Alarm Systems Standard | BS 5839-8:2008 | |
Voice Communication Standard | BS 5839-9:2003 | |
(Risk Assessment May Demand Mechanical Protection) | ||
Materials | Drain Wire | 0.80mm Dia (0.50mm2) Tinned Copper |
Conductors | Plain Annealed Copper | |
Core Installation | Fire Resistant ZHLS Silicone | |
Screening | Aluminium Foil | |
Outer Sheath | Low Smoke Halogen Free Thermoplastic | |
Working Voltage | Core to Core | 500V |
Core to CPC | 300V | |
Types | Outer Sheath Colours | Red, White or Black |
Number of Cores | 2, 3 & 4 Core | |
Inner Cores CSA | 1.0, 1.5, 2.5 & 4.0mm CSA | |
Resistance | 1.0mm CSA | 18.1 Ohms / 1 Km |
1.5mm CSA | 12.1 Ohms / 1 Km | |
2.5mm CSA | 7.41 Ohms / 1 Km | |
4.0mm CSA | 4.61 Ohms / 1 Km | |
Minimum Bend Radius | Radius = 6 x Diameter | |
Operating Temp. | Minimum/Maximum | -40°C to +90°C |
Installation Temp. | Minimum/Maximum | 0°C to +70°C |
Voltage Drop (DC or Single Phase AC) |
1.0mm CSA | 44 Ohms mV / A / m |
1.5mm CSA | 29 Ohms mV / A / m | |
2.5mm CSA | 18 Ohms mV / A / m | |
Approximate Overall Diameter |
2 Core | 1.0mm / 7.15mm |
1.5mm / 7.40mm | ||
2.5mm / 8.70mm | ||
3 Core | 1.0mm / 7.75mm | |
1.5mm / 8.55mm | ||
2.5mm / 9.20mm | ||
4 Core | 1.0mm / 8.00mm | |
1.5mm / 8.80mm | ||
2.5mm / 11.10mm | ||
Approximate Weights |
2 Core with CPC | 1.0mm – 8.0 Kg / 100 m |
1.5mm – 9.5 Kg / 100 m | ||
2.5mm – 14.1 Kg / 100 m | ||
3 Core with CPC | 1.0mm – 9.5 Kg / 100 m | |
1.5mm – 12.9 Kg / 100 m | ||
2.5mm – 19.1 Kg / 100 m | ||
4 Core with CPC | 1.0mm – 10.9 Kg / 100 m | |
1.5mm – 14.5 Kg / 100 m | ||
2.5mm – 22.2 Kg / 100 m | ||
Current Rating (Current Ratings listed are at 30°C Refer to BS7671/EE Wiring Regulations for de-rating factor.) |
Cable Clipped (DC or Single Phase AC) |
1.0mm 15A |
1.5mm 19.5A | ||
2.5mm 27A | ||
Enclosed (DC or Single Phase AC) |
1.0mm 13A | |
1.5mm 16.5A | ||
2.5mm 23A | ||
Insulation Resistance | 10MÙ> at 5000V d.c. |
FEATURES
- Reduced Installation time and costs
- Easy to install and Superb Working Flexibility
- All in one – Easy to Strip Outer Sheath
- No Separate Foil
- No Additional Fibre Wraps
- No mica tape on conductors
- No additional core separators to remove
- Cable Construction Provides High Level Data Protection
Certified by LPCB to meet fire test Standards – BS EN 50200:2006 + Annex E 30 minutes, BS EN 50200 PH30, PH60 & PH120 & BS 6387 CWZ. It is also fully approved to the Low Smoke & Zero Halogen requirements detailed by BS 5839-:2013 & BS7629-1:2008.
Shield ‘Premium’ Cable retains continuity for 30 minutes under fire conditions at 830°C, this demanding fire cable test includes a final 15 minutes under fire & water spray conditions while a mechanical shock is applied every 5 minutes throughout the full 30 minute test.
LPCB approved to | Fire Resistance Standard | BS EN 50200:2006 +Annex E 30 mins |
---|---|---|
Fire Resistance Standard | BS EN 50200:2006 PH120 | |
Fire Resistance Standard | BS 6387:1994 Clause 11 CWZ | |
Halogen Emission Standard | BS EN 50267-2-1:1999 | |
Halogen Emission Standard | BS EN 61034-2:2005 | |
Also for use with | Emergency Lighting | BS 5266-1:2005 |
Voice Alarm Systems Standard | BS 5839-8:2008 | |
Voice Communication Standard | BS 5839-9:2003 | |
(Risk Assessment May Demand Mechanical Protection) | ||
Materials | Drain Wire | 0.80mm Dia (0.50mm2) Tinned Copper |
Conductors | Plain Annealed Copper | |
Core Installation | Fire Resistant ZHLS Silicone | |
Screening | Aluminium Foil | |
Outer Sheath | Low Smoke Halogen Free Thermoplastic | |
Working Voltage | Core to Core | 500V |
Core to CPC | 300V | |
Types | Outer Sheath Colours | Red, White or Black |
Number of Cores | 2, 3 & 4 Core | |
Inner Cores CSA | 1.0, 1.5, 2.5 & 4.0mm CSA | |
Resistance | 1.0mm CSA | 18.1 Ohms / 1 Km |
1.5mm CSA | 12.1 Ohms / 1 Km | |
2.5mm CSA | 7.41 Ohms / 1 Km | |
4.0mm CSA | 4.61 Ohms / 1 Km | |
Minimum Bend Radius | Radius = 6 x Diameter | |
Operating Temp. | Minimum/Maximum | -40°C to +90°C |
Installation Temp. | Minimum/Maximum | 0°C to +70°C |
Voltage Drop (DC or Single Phase AC) |
1.0mm CSA | 44 Ohms mV / A / m |
1.5mm CSA | 29 Ohms mV / A / m | |
2.5mm CSA | 18 Ohms mV / A / m | |
Approximate Overall Diameter |
2 Core | 1.0mm / 7.15mm |
1.5mm / 7.40mm | ||
2.5mm / 8.70mm | ||
3 Core | 1.0mm / 7.75mm | |
1.5mm / 8.55mm | ||
2.5mm / 9.20mm | ||
4 Core | 1.0mm / 8.00mm | |
1.5mm / 8.80mm | ||
2.5mm / 11.10mm | ||
Approximate Weights |
2 Core with CPC | 1.0mm – 8.0 Kg / 100 m |
1.5mm – 9.5 Kg / 100 m | ||
2.5mm – 14.1 Kg / 100 m | ||
3 Core with CPC | 1.0mm – 9.5 Kg / 100 m | |
1.5mm – 12.9 Kg / 100 m | ||
2.5mm – 19.1 Kg / 100 m | ||
4 Core with CPC | 1.0mm – 10.9 Kg / 100 m | |
1.5mm – 14.5 Kg / 100 m | ||
2.5mm – 22.2 Kg / 100 m | ||
Current Rating (Current Ratings listed are at 30°C Refer to BS7671/EE Wiring Regulations for de-rating factor.) |
Cable Clipped (DC or Single Phase AC) |
1.0mm 15A |
1.5mm 19.5A | ||
2.5mm 27A | ||
Enclosed (DC or Single Phase AC) |
1.0mm 13A | |
1.5mm 16.5A | ||
2.5mm 23A | ||
Insulation Resistance | 10MÙ> at 5000V d.c. |
- Reduced Installation time and costs
- Easy to install and Superb Working Flexibility
- All in one – Easy to Strip Outer Sheath
- No Separate Foil
- No Additional Fibre Wraps
- No mica tape on conductors
- No additional core separators to remove
- Cable Construction Provides High Level Data Protection
Do you want to contact with us?
If you want to contact with us? please fill free an message by contact page.
Request a free consultation
8 years Experiences in my business service
Send us an email and we will get in tuch shortly or phone between 9.00am to 6.00pm Saturday to Thursday .